MSI Global English Forum

Thanks alot..really appreciated

Thanks for your reply.

Quote from: rbleroy91 on Today at 09:31:43

Hello,I do not believe because not listed does not mean incompatible. For the moment, keep only 1 RAM stick in DIMMA2 because it works goodly:Sorry, but the first thing to...

I am up to date on dragon Center, Steel Series and all drivers. It just resets to off every time I restart the computer. Which makes me have to open dragon center to turn them back on. Very confused.

I have a MAG27CQ monitor. It has a 75mm Vesa mounting option by removing the included stand. I have an Ergonomics Mount that has a mounting plate with holes at the 75mm mark and extends to holes at the 100mm mark. The MAG27CQ mount is 75mm, but it is i...

Quote from: darkhawk on Today at 15:06:12

It looks like you've got sufficient airflow. I doubt your issue is related to the air.

Honestly, the GPU is going to get hot, but it shouldn't really be running at 82C.

Wh...

Quote from: keino on Today at 15:50:22

And now I just bought 2x 140mm fans that I will put 1 on the front and 1 on the top.
Yeah, but kinda sucks since it will throttle and freeze for a few secs in-game when it rea...

Hi,
Recently I had my motherboard replaced on GS65-8RF and everything was OK. I have updated the BIOS to E16Q2IMS.10E and started to have "please change product name" problem. I'm having some problems with some programs due to this issue. After sear...

Power cable. Hello. In my Codex XE PC there is a power cable that goes from the PSU to the front - suppose it is for the light in the front. It is stuck from the P...

Quote from: darkhawk on Today at 17:28:10

You'd need to take it apart. But if you don't feel confident doing that, I would probably contact MSI support and see what they say.
It sounds to me like it's just not cool...

For flashing to bios 4.3 follow the instructions as follows exactly using the prepared bios archive linked there. Do NOT use the archive downloaded from product site.

Your issue with modern graphics cards is a common probl...

Still try it. Guessing won't help.

but i dont get this bug every time

Hi,

Thanks for the quick reply. I have read similar instructions before I think on a post I found. Just a couple of questions (as I am a noob)..

'making sure the Legacy USB is enabled' is this done in the BIOS?

Do i need to change the boot sequence in ...

tried the first option. the image does not appear. with the second option has not yet tried. but the flash drive is already ready. gave the service for diagnosis.

You are using vbios version TV341MH.2H1. Latest is version TV341MH.2H4: https://forum-en.msi.com/index.php?topic=294894.msg1663651#msg1663651

It's a Z97 board:

I'm not sure if it should be showing up in the BIOS.

I've installed Windows to the M.2 drive using my Asus board, to simplify things. I'm going to transfer it to the MPOWER ...

It is quite unlikely that the vga is bad. It is either working or not. A bad vga does not only have issues in VR but not in normal 3d. Try the card in another pc if possible.

To contact MSI: >>How ...

Quote from: rbrussel on Today at 15:55:16

For the stability i can test it in thursday, because i am not at home.

Then waiting for it.

Hey I had the same problem, not to worry easy fix.

It says in your guidebook about how to use Bios Flash (+) where you don't need to post in order to update the bios.

As you said you can just use a USB and it takes about 3 minutes but you do need to f...

Latest Images